COOLANT TEMPERATURE SENSOR - R + R

Operation 1056B50 · MULTI-POINT INJECTION SYSTEM (MPI)

3.0 24V V6

Removing

- Disconnect the negative battery terminal.

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

Op. 1048A47 SLEEVE FROM RIGID PIPE TO THROTTLE BODY - R R

1. Undo the fixing bolt (1a) and remove the mounting collar (1b)

2. Move the wiring to free up the work area.

- Position a suitable container for collecting the engine coolant.

1. Disconnect the electrical connection from the engine coolant temperature sensor.

2. Undo the engine coolant temperature sensor and remove it.

Refitting

- Refit the engine coolant temperature sensor.

- Connect the electrical connection to the engine coolant temperature sensor.

- Position the wiring and fasten the collar.

Op. 1048A47 SLEEVE FROM RIGID PIPE TO THROTTLE BODY - R R

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

- Connect the negative battery terminal.

Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY

2.0 16v

Removing

Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.

- Disconnect the negative battery terminal.

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

See in Op. 1048A10

- Position a suitable container for collecting the coolant fluid.

1. Disconnect the electrical connection for the air temperature sensor.

2. Undo the coolant temperature sensor and remove it.

Refitting

- Fit the coolant temperature sensor in place and tighten it.

- Connect the electrical connection for the water temperature sensor.

See in Op. 1048A10

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

- Connect the negative battery terminal.

Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.

Op. 0010T21 COOLANT CHECK DENSITY AND TOP UP IF NECESSARY