Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Ulysse Factory Service Manual (2002-2010)08 · Engine
08 · Engine

Engine oil temperature sender unit - r + r

Make
Fiat
Model
Ulysse Factory Service Manual
Year
2002–2010
Section
Engine lubrication › Engine oil temperature sender unit - r + r
EngineEngine oil temperature sender unit - r + r

ENGINE OIL TEMPERATURE SENDER UNIT - R + R

Operation 1084A42 · INDICATORS/CHECK DEVICES

2.0 16v

Removing

Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE

Op. 1048A39 SLEEVE FROM AIR CLEANER TO RIGID PIPE - R R

Op. 1048A31 RIGID PIPE CONNECTING AIR CLEANER TO INLET MANIFOLD RIGID PIPE R R

Op. 1056B15 THROTTLE BODY INTERGRAL WITH MDS - R R

Op. 1072B10 INLET MANIFOLD - R + R AND REPLACE SEAL

1. Undo and remove the engine oil pressure warning light switch.

ENGINE OIL TEMPERATURE SENDER UNIT - R + R

Refitting

Position the engine oil pressure warning light switch and tighten it to the recommended torque.

Value daNmFasteningComponentØ
3.2SensorSwitch for engine oil pressure warning light

Op. 1072B10 INLET MANIFOLD - R + R AND REPLACE SEAL

Op. 1056B15 THROTTLE BODY INTERGRAL WITH MDS - R R

Op. 1048A31 RIGID PIPE CONNECTING AIR CLEANER TO INLET MANIFOLD RIGID PIPE R R

Op. 1048A39 SLEEVE FROM AIR CLEANER TO RIGID PIPE - R R

Op. 1048A10 AIR CLEANER FILTERING ELEMENT - REPLACE

Op. 5010B18 CLIMATE CONTROL UNIT AIR INTAKE - R.R.

Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.

2.0 16V JTD

Removing

- Position the vehicle on a lift.

- Disconnect the negative battery terminal.

- Raise the lift.

Op. 7055B54 UNDER-ENGINE GUARD - R R

1. Disconnect the electrical connection for the switch.

2. Undo and remove the engine oil pressure warning light switch.

ENGINE OIL TEMPERATURE SENDER UNIT - R + R

Refitting

- Fit the engine oil pressure warning light switch.

- Connect the electrical connection.

Op. 7055B54 UNDER-ENGINE GUARD - R R

- Lower the lift.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.

2.2 16V JTD

Removing

- Position the vehicle on a lift.

- Disconnect the negative battery terminal.

- Raise the lift.

Op. 7055B54 UNDER-ENGINE GUARD - R R

1. Disconnect the electrical connection for the switch.

2. Undo and remove the engine oil pressure warning light switch.

ENGINE OIL TEMPERATURE SENDER UNIT - R + R

Refitting

- Fit the engine oil pressure warning light switch.

- Connect the electrical connection.

Op. 7055B54 UNDER-ENGINE GUARD - R R

- Lower the lift.

- Connect the negative battery terminal.

- Remove the vehicle from the lift.

Parts & tools for this job Staging For 2002 Fiat Ulysse

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.