Handbrake lever - r+r
- Make
- Fiat
- Model
- Ulysse Factory Service Manual
- Year
- 2002–2010
- Section
- Handbrake › Handbrake lever - r+r
HANDBRAKE LEVER - R+R
Removing
Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.
- Disconnect the negative battery terminal.
Op. 3380A44 HANDBRAKE/LINKAGE PROTECTION - R+R
- Position the vehicle on a lift.
1. Loosen the adjustment nut.
1. Disconnect the handbrake cable from the lever.
2. Undo the front retaining bolt
3. Use the appropriate tool to unscrew the rear retaining bolt.
| Description | Code | Function | |
|---|---|---|---|
| 2 | Spanner | 1.870.749.000 | Loosen/tighten the rear fixing bolt |
- Disconnect the electrical connection.
4. Remove the handbrake lever.
Refitting
- Fit the handbrake lever.
- Tighten the front retaining bolt to the recommended torque.
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 4.0 | Bolt | HANDBRAKE LEVER |
- Use the appropriate tool to tighten the rear retaining bolt to the specified torque.
| Description | Code | Function | |
|---|---|---|---|
| Spanner | 1.870.749.000 | Loosen/tighten the rear fixing bolt |
| Value - daNm | Fastening | Component | Ø | |
|---|---|---|---|---|
| 4.0 | Bolt | HANDBRAKE LEVER |
- Connect the electrical connection.
- Connect the handbrake cable to the lever.
- Adjust the handbrake lever travel.
- Remove the vehicle from the lift.
Op. 3380A44 HANDBRAKE/LINKAGE PROTECTION - R+R
- Connect the negative battery terminal.
Parts & tools for this job Staging For 2002 Fiat Ulysse
- PARTBrake padsSearch: Fiat Ulysse 2002 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.