Lateral acceleration and yaw sensor r r
- Make
- Fiat
- Model
- Ulysse Factory Service Manual
- Year
- 2002–2010
- Section
- Drive control › Lateral acceleration and yaw sensor r r
LATERAL ACCELERATION AND YAW SENSOR R R
Removing
Op. 5530B56 BATTERY DRIP TRAY COVER - R.R.
- Disconnect the negative battery terminal.
Op. 7065C56 ODDMENT COMPARTMENT UNDERNEATH FRONT SEATS - R.R.
Op. 7045A10 L/H OR R/H FRONT SEAT (ONE) - R+R
- < R1 > [Both]
1. Undo the retaining bolts.
2. Open the top lid.
3. Raise the front floor
4. Unscrew the fastenings.
5. Remove the lower cover.
1. Prise up and remove the safety catch.
2. Disconnect the electrical connection.
3. Undo the retaining nuts.
4. Remove the yaw sensor.
Refitting
- Position the yaw sensor.
- Tighten the retaining nuts.
- Connect the electrical connection.
- Postion the safety catch.
- Raise the rear floor
- Fit the lower cover.
- Tighten the fastenings.
- Close the top lid.
- Tighten the retaining bolts.
Op. 7045A10 L/H OR R/H FRONT SEAT (ONE) - R+R
- < R1 > [Both]
Op. 7065C56 ODDMENT COMPARTMENT UNDERNEATH FRONT SEATS - R.R.
- Connect the negative battery terminal.
Parts & tools for this job Staging For 2002 Fiat Ulysse
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.