23 · Diagnostics

Reversing lights not working

Fault diagnosisReversing lights not working

REVERSING LIGHTS NOT WORKING

With the ignition key in the ON position, when reverse gear is engaged, the reversing light does not come on

0	PRELIMINARY CHECKS	All OK	Problems met	Operation
		Results of the tests
	Connect the diagnostic equipment (Examiner Plus or Smart) to the Body Computer and check that there are no faults	Continue to Step 1	the operation of the lights in active diagnosis.	Continue according to the instructions for the diagnostic equipment
1	CHECK ON INDIVIDUAL LIGHTS	All OK	Problems met	Operation
	Check the condition of the reversing bulb and the right rear light cluster	Continue to Step 2	Bulb damaged	Change the bulb Op. 5550D26
		Continue to Step 2	Bulb damaged	Renew or replace the light cluster Op. 5540A44
2	REVERSING LIGHT SWITCH CHECK	All OK	Problems met	Operation
	Check that the reversing light switch is correctly fastened and working properly	Continue to Step 3	Reversing light switch faulty	Renew or replace the reversing light switch Op. 5550D22
3	CHECK ON REVERSING LIGHT ELECTRICAL CIRCUIT	All OK	Problems met	Operation
	Check, in order: reversing light fuse (services) connections between Body Computer and reversing light switch; connections between Body Computer and reversing light bulb; bulb earth See E2022 REVERSING LIGHTS	Continue to Step 4	Connections broken	Replace the fuse (and search for the cause of its blowing)
			Connections broken	Restore the connections See E2022 REVERSING LIGHTS
			Connections broken	Repair the earth contact See E2022 REVERSING LIGHTS
4	Continue as instructed by the tester	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.