Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)23 · Fault diagnosis
23 · Diagnostics

Fog lights not working

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Lights › Fog lights not working
Fault diagnosisFog lights not working

FOG LIGHTS NOT WORKING

When the front fog lamps switch is operated with the side lights on, the front fog lamps do not work.

Results of the tests
1CHECKING WITH DIAGNOSTIC EQUIPMENTAll OKProblems metOperation

Connect the Examiner to the diagnostic socket

Check that there are no faults in the Body Computer

Check light operation while in active diagnosis mode

Continue to Step 2Fog lamp relay errorContinue to Step 3
Fog lamp relay errorContinue to Step 2
2CHECK ON INDIVIDUAL LIGHTSAll OKProblems metOperation
Check the condition of individual bulbs and lampsContinue to Step 3Bulb damagedChange the bulb Op. 5540D14
Fog light faultyRepair or replace the front fog lamp Op. 5540D10
3CHECK FOG LAMP ELECTRIC CIRCUITAll OKProblems metOperation

Check, in order:

  • front fog lamp fuse
  • front fog lights relay
  • Engine bay control unit power supply
  • connections between Body Computer and engine bay control unit;
  • connections between engine bay control unit and bulbs;
  • connections between Body Computer and fog lights switch;
  • bulb earth See E2030 FOG LIGHTS
Continue to Step 4Connections brokenReplace the component involved (if a fuse is involved, search for the cause of the problem)
Connections brokenRestore the connections See E2030 FOG LIGHTS
4CHECK ON FRONT FOG LAMPS SWITCHAll OKProblems metOperation
Check the operation of the fog lights switch See E2030 FOG LIGHTSContinue to Step 5Fog lights switch faultyReplace the fog light switch Op. 5540D18
5CHECK ON BODY COMPUTERAll OKProblems metOperation
Check that the Body Computer is working properly, in particular the front fog lamps control functionContinue to Step 6Device not workingReplace the Body Computer Op. 5505A32
6Continue as instructed by the testerAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosis

Parts & tools for this job Staging For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.