23 · Diagnostics

Milometer not working

Fault diagnosisMilometer not working

MILOMETER NOT WORKING

The milometer either does not work or does not work properly whilst driving. the speedometer works properly.

If the speedometer is also not working correctly, see See table K03 SPEEDOMETER NOT WORKING

the milometer signal is supplied by the Body Computer Node using the signals coming from the Brake Node.

0	PRELIMINARY CHECK	All OK	Problems met	Operation
		Results of the tests
	Check that no failure message is displayed with the engine started up	Continue to Step 2	There are faults detected	Continue to Step 1
1	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner) to the Body Computer. Check the following on the CAN information network: for inactive control units; control unit errors; absence of control unit with error in CAN line	Continue to Step 2	Presence of faults in the CAN network	Continue following the instructions for the diagnostic equipment
		Continue to Step 2	Presence of errors at instrument panel node	Continue to Step 2
2	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner) to the diagnostic socket or keep it connected and check that there are no faults at the instrument panel node	Continue to Step 3	Presence of errors or failed dialogue with the diagnostic equipment	Continue following the instructions for the diagnostic equipment
3	CHECKING WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keep the diagnostic equipment (Examiner) connected to the diagnostic socket and check the operation of the display by means of active diagnosis	Continue to Step 4	Milometer not working	Replace instrument panel Op. 5560B11
4	Continue as instructed by the tester	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.