23 · Diagnostics

Display does not show outside temperature

Make: Fiat
Model: Panda Factory Service Manual
Year: 2003–2012
Section: Instrument panel › Display does not show outside temperature

‹ Prev Trip meter does not zero Next › Doors open check warning light on

Fault diagnosisDisplay does not show outside temperature

DISPLAY DOES NOT SHOW OUTSIDE TEMPERATURE

With the ignition ON, the reconfigurable matrix does not display the outside temperature;

the temperature information is supplied directly to the instrument panel node by the sensor on the driver's door mirror

0	PRELIMINARY CHECK	All OK	Problems met	Operation
		Results of the tests
	Check that with the ignition switched ON: that there are no dashes displayed in place of the temperature that there are no failure messages displayed	Continue to Step 2	Display shows information described	Restore the standard screen on the matrix that can be reconfigured
		Continue to Step 2	There are dashes in place of the temperature.	Continue to Step 1
1	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Connect the diagnostic equipment (Examiner or other instruments) and check the CAN network information: for inactive control units; control unit errors; absence of control unit with error in CAN line	Continue to Step 2	Presence of faults in the CAN network	Continue following the instructions for the diagnostic equipment
		Continue to Step 2	Presence of errors at instrument panel node	Continue to Step 2
2	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keep the diagnostic equipment (Examiner or other instruments) connected to the diagnostic socket, check that there are no faults at the instrument panel node	Continue to Step 3	Presence of errors or failed dialogue with the diagnostic equipment	Continue following the instructions for the diagnostic equipment
3	CHECK WITH DIAGNOSTIC EQUIPMENT	All OK	Problems met	Operation
	Keeping the diagnostic equipment (Examiner or other instruments) connected to the diagnostic socket, check the operation of the reconfigurable matrix through active diagnosis.	Continue to Step 4	Display that can be reconfigured not working	Replace instrument panel Op. 5560B11
4	CHECK ON CORRECT OPERATION	All OK	Problems met	Operation
	Check that the fault is no longer present	End of diagnosis

‹ Prev Trip meter does not zero Next › Doors open check warning light on

Parts & tools for this job Staging For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.