Hydraulic tappets all r r

Operation 1036H57 · Tappets and rocker shafts

1.3 JTD 16v

Removing

- 0010T84 coolant for air conditioning system dehydrate and recharge

- 4450B04 right front wheel r r

- 5530B10 battery - r+r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 1060G90 diesel injection wiring harness - r r

- 1092G11 Engine components single drive BELT - R.R. for versions with air conditioning

- 1092A12 crankshaft pulley - r+r for versions with air conditioner

- 1088B10 engine cooling tank - r + r

- 1016B10 single cylinder head extension - change gasket

1. Remove the valve rocker arms.

2. Remove the hydraulic tappets.

Refitting

Lubricate with engine oil and refit the hydraulic tappets in their seatings.

Position the hydraulic tappets with the oil passage hole facing towards the outside of the bottom cylinder head: this position puts this hole in communication with the oil channel present in the bottom cylinder head.

Place the valve rocker arms back in their housings.

- 1016B10 single cylinder head extension - change gasket

- 1088B10 engine cooling tank - r + r

- 1092A12 crankshaft pulley - r+r for versions with air conditioner

- 1092G11 Engine components single drive BELT - R.R. for versions with air conditioning

- 1060G90 diesel injection wiring harness - r r

- 5530B52 Battery DRIP TRAY/SUPPORT - R.R.

- 5530B10 battery - r+r

- 4450B04 right front wheel r r

- 0010T84 coolant for air conditioning system dehydrate and recharge

- 0010T21 coolant check density and top up if necessary

Remove the car from the ramps.