Throttle case - r + r

Operation 1056B14 · Multi-point injection system (mpi)

1.1

Removing

Disconnect the battery negative terminal.

- 1048A10 air cleaner filtering element - replace

1. Release the accelerator cable (1b) working on the throttle valve (1a).

2. Disconnect the accelerator cable from the mounting bracket.

1.2 8v

Removing

Disconnect the battery negative terminal.

- 1048A10 air cleaner filtering element - replace

1. Release the accelerator cable (1b) working on the throttle valve (1a).

2. Disconnect the accelerator cable from the mounting bracket.

1.1

1. Disconnect the electrical connections for the throttle position sensor (1a) and the engine idle actuator (1b).

2. Undo the fixing bolts (2a) and remove the throttle casing (2b).

1.2 8v

1. Disconnect the electrical connections for the throttle position sensor (1a) and the engine idle actuator (1b).

2. Undo the fixing bolts (2a) and remove the throttle casing (2b).

1.1

Refitting

Fit the throttle casing in position and tighten the fixing bolts.

Connect the electrical connections for the throttle position sensor and the engine idle actuator.

Fit the accelerator cable.

- 1048A10 air cleaner filtering element - replace

Connect the battery negative terminal.

1.2 8v

Refitting

Fit the throttle casing in position and tighten the fixing bolts.

Connect the electrical connections for the throttle position sensor and the engine idle actuator.

Fit the accelerator cable.

- 1048A10 air cleaner filtering element - replace

Connect the battery negative terminal.