Coolant temperature sensor - r + r

Operation 1056B50 · Multi-point injection system (mpi)

1.1

Removing

Disconnect the battery negative terminal.

- 1048A10 air cleaner filtering element - replace

1. Open the fastening clips and release the wiring.

2. Undo the fixing nuts (2a) and remove the wiring mounting bracket (2b).

1.2 8v

Removing

Disconnect the battery negative terminal.

- 1048A10 air cleaner filtering element - replace

1. Open the fastening clips and release the wiring.

2. Undo the fixing nuts (2a) and remove the wiring mounting bracket (2b).

1.1

1. Disconnect the electrical connection for the engine coolant temperature sensor.

2. Open the fastening band (2a) and disconnect the coolant pipe (2b).

3. Undo the fixing nuts (3a) and remove the engine coolant temperature sensor (3b).

1.2 8v

1. Disconnect the electrical connection for the engine coolant temperature sensor.

2. Open the fastening band (2a) and disconnect the coolant pipe (2b).

3. Undo the fixing nuts (3a) and remove the engine coolant temperature sensor (3b).

1.1

Refitting

Fit the sensor in place and tighten the fixing nuts.

Connect the engine coolant pipe and close the fastening band.

Connect the electrical connection for the engine coolant temperature sensor.

Fit the wiring mounting bracket in place and tighten the fixing nuts.

- 1048A10 air cleaner filtering element - replace

- 0010T21 coolant check density and top up if necessary

Connect the battery negative terminal.

1.2 8v

Refitting

Fit the sensor in place and tighten the fixing nuts.

Connect the engine coolant pipe and close the fastening band.

Connect the electrical connection for the engine coolant temperature sensor.

Fit the wiring mounting bracket in place and tighten the fixing nuts.

- 1048A10 air cleaner filtering element - replace

- 0010T21 coolant check density and top up if necessary

Connect the battery negative terminal.