Rear exhaust silencer - r + r
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Exhaust pipes and silencers › Rear exhaust silencer - r + r
Rear exhaust silencer - r + r
Removing
Place the car on a lift.
Raise the car.
1. Release the exhaust silencer from the rubber mountings.
2. Release the centre section of the exhaust pipe from the rubber mounting.
Removing
Place the car on a lift.
Raise the car.
1. Release the exhaust silencer from the rubber mountings.
2. Release the centre section of the exhaust pipe from the rubber mounting.
Removing
Place the car on a lift.
Raise the car.
1. Release the exhaust silencer from the rubber mountings.
2. Release the centre section of the exhaust pipe from the rubber mounting.
1. Undo the fastening for the flange joining the rear silencer to the centre section of the exhaust pipe.
2. Remove the rear exhaust silencer.
1. Undo the bolt fixing the flange joining the rear silencer to the centre section of the exhaust pipe.
2. Remove the rear exhaust silencer.
1. Undo the bolt fixing the flange joining the rear silencer to the centre section of the exhaust pipe.
2. Remove the rear exhaust silencer.
Refitting
Fit the rear exhaust silencer in place and secure it to the rubber mountings.
Secure the centre section of the exhaust pipe to the rubber mounting.
Tighten the nut securing the flange joining the rear exaust silencer to the centre section of the exhaust pipe.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Nut | REAR EXHAUST SILENCER | M10 x 1.25 | 4 |
Lower the vehicle.
Remove the vehicle from the ramp.
Refitting
Fit the rear exhaust silencer in place and secure it to the rubber mountings.
Secure the centre section of the exhaust pipe to the rubber mounting.
Tighten the nut fixing the flange joining the rear exhaust silencer to the centre section of the exhaust pipe.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Nut | REAR EXHAUST SILENCER | M10 x 1.25 | 4 |
Lower the vehicle.
Remove the vehicle from the ramp.
Refitting
Fit the rear exhaust silencer in place and secure it to the rubber mountings.
Secure the centre section of the exhaust pipe to the rubber mounting.
Tighten the nut fixing the flange joining the rear exhaust silencer to the centre section of the exhaust pipe.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Nut | REAR EXHAUST SILENCER | M10 x 1.25 | 4 |
Lower the vehicle.
Remove the vehicle from the lift.
Parts & tools for this job Staging For 2003 Fiat Panda
- PARTExhaust gasketSearch: Fiat Panda 2003 exhaust gasket
- TOOLPenetrating oilSearch: penetrating oil
- TOOLOBD2 scannerSearch: OBD2 scanner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.