Radio aerial amplifier - r r
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Accessories › Radio aerial amplifier - r r
Radio aerial amplifier - r r
If the car is fitted with an Air Bag system, before working on it, it is essential to carry out the following preliminary operations: (1) turn the ignition off and remove the key; (2) disconnect the battery termnals and insulate them; (3) wait at least 10 minutes before proceeding.
FOLLOW ALL THE RECOMMENDED SAFETY RULES (see assembly 5508C - AIR BAG SYSTEM).
Removing
- 7040H30 front pillar trim - r r (Both)
- 7040L42 sill plate connection of one front door (1), lh or rh - r r
- 7040L40 front compartment scuff strip - r r (Both)
- 7040H36 central trim lower element - r r (Both)
- 7040H38 central pillar upper element - r r (Both)
- 7050A20 one-piece rear seat cushion - r r
- 7040H50 rear panel - r r (Both)
- 7040H66 LEFT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R.
- 7040H67 RIGHT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R.
- 7065C30 interior l/h or r/h grab handle (one) - r+r (All)
- 7040E10 front courtesy light - r+r
- 7065C34 l/h or r/h sun blind (one) - r+r (Both)
- 7040H10 roof panel lining - r r
- 5570T26 aerial for car radio - r+r
1. Disconnect the electrical connection.
| Name | Connector | |
|---|---|---|
| 1 | Aerial amplifier/power supply | P25 |
2. Open the retaining clip (2a) and disconnect the coaxial cable (2b).
3. Undo the fixing nut (3a) and recover the spacer (3b).
1. Remove the aerial mounting / amplifier.
Refitting
Fit the aerial mounting / amplifier.
Fit the spacer and tighten the fixing nut.
Connect the electrical connection.
| Name | Connector | |
|---|---|---|
| Aerial amplifier/power supply | P25 |
Connect the coaxial cable and secure it with the retaining clip.
- 5570T26 aerial for car radio - r+r
- 7040H10 roof panel lining - r r
- 7065C34 l/h or r/h sun blind (one) - r+r (Both)
- 7040E10 front courtesy light - r+r
- 7065C30 interior l/h or r/h grab handle (one) - r+r (All)
- 7040H67 RIGHT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R.
- 7040H66 LEFT REAR SIDE TRIM, WITH REAR PARCEL SHELF SUPPORT - R.R.
- 7040H50 rear panel - r r (Both)
- 7050A20 one-piece rear seat cushion - r r
- 7040H38 central pillar upper element - r r (Both)
- 7040H36 central trim lower element - r r (Both)
- 7040L40 front compartment scuff strip - r r (Both)
- 7040L42 sill plate connection of one front door (1), lh or rh - r r
- 7040H30 front pillar trim - r r
Connect the battery terminals.
Parts & tools for this job Staging For 2003 Fiat Panda
- TOOLDigital multimeterSearch: automotive digital multimeter
- PARTAssorted fuse kitSearch: car fuse assortment kit
- TOOLWire crimper and connector kitSearch: wire crimper connector kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.