Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)07 · Diagnostic checks
07 · Diagnostics

Lubrication system - check delivery pressure

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Various controls › Lubrication system - check delivery pressure
Diagnostic checksLubrication system - check delivery pressure

Lubrication system - check delivery pressure

Operation 0510C20 · Check systems

1.1, 1.2 8v

Let the engine warm up (engine oil temperature 100° C).

Refer to op. 1084A42 engine oil pressure warning light switch - r + r

1. Fit the connector in place of the low engine oil pressure switch.

NameCountry
1Connector1.860.969.000

2. Connect a pressure gauge to the connector.

Lubrication system - check delivery pressure

1.3 JTD 16v

Let the engine warm up (engine oil temperature 100° C).

Refer to op. 1084A42 engine oil pressure warning light switch - r + r.

1. Fit the connector in the engine oil pressure warning light switch housing.

NameCountry
1Connector1.860.969.000

2. Connect a pressure gauge to the connector.

Lubrication system - check delivery pressure

1.1, 1.2 8v

Start the engine only for the time required to check that the engine oil pressure is within the specified values.

MeasurementValue
Check delivery pressure (bar)0.7
Idle speed (-)
MeasurementValue
Check delivery pressure (bar)4.0
- (g/m.)4000

Remove the pressure gauge.

Remove the connector.

NameCountry
1Connector1.860.969.000

Refer to op. 1084A42 engine oil pressure warning light switch - r + r

1.3 JTD 16v

Start the engine only for the time required to check that the engine oil pressure is within the specified values.

MeasurementValue
Check delivery pressure (bar)1
Idle speed (-)
MeasurementValue
Check delivery pressure (bar)3.0 ÷ 3.5
- (g/m.)4000

Remove the pressure gauge.

Remove the connector.

NameCountry
Connector1.860.969.000

Refer to op. 1084A42 engine oil pressure warning light switch - r + r.

Parts & tools for this job Staging For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.