Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)13 · Brakes
13 · Brakes

Rear calliper bracket - r r

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Disc brakes › Rear calliper bracket - r r
BrakesRear calliper bracket - r r

REAR CALLIPER BRACKET - R R

Operation 3310B57 · REAR DISC BRAKES

1.2 8v

Removing

Position the vehicle on a lift.

Raise the vehicle.

Op. 4450B08 RIGHT REAR WHEEL R R

[Left or right]

1. Undo the retaining bolts.

2. Move the brake caliper outside of the work area.

REAR CALLIPER BRACKET - R R

1. Undo the fixing bolts (1a) and remove the brake caliper bracket (1b).

REAR CALLIPER BRACKET - R R

Refitting

Place the brake caliper in position and tighten the fixing bolts to torque.

Place the brake caliper in position and tighten the fixing bolts to torque.

Op. 4450B08 RIGHT REAR WHEEL R R

[Left or right]

Remove the vehicle from the lift.

Parts & tools for this job Staging For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.