Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)18 · Body fittings
18 · Body & interior

Introduction - REAR SEATS

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Rear seats › Introduction - REAR SEATS
Body fittingsIntroduction - REAR SEATS

Introduction - REAR SEATS

The rear seats are fitted with squabs built to ensure maximum occupant safety in the case of various types of impact. They also prevent items in the luggage compartment from being propelled forward.

The squab and seat may be of different types, one-piece seat and squab with central head restraint and slide function, with split seat and squab with slide function and squab with adjustable tilt. The squab recline catches are located near the joint.

The rear cushions come with a pressed steel base with antislip profile that forms an effective antisubmarining structure in conjunction with the beam welded to the rear floor pan. On the sliding version, the slide mechanisms are located to the body floorpan. On certain versions, the rear seat squab may be split and reclined separately 40/60%. On the squab,

The seats are fitted with two head restraints for the side seats. These can be adjusted to two positions. Certain versions come with a third head restraint for the central seat with the same specifications. Versions with a third head restraint also come with a central inertia reel seat belt.

On certain versions, the rear seats may be sliding with adjustable squab recline.

General view

Introduction - REAR SEATS

1 - Side head restraint

2 - Squab trim and padding

3 - Squab structure

5 - Cushion trim and padding

5 - Cushion bottom

4 - Squab release devices

Specifications

One-piece seat and squab with central head restraint and slide function, with split seat and squab with slide function and squab with adjustable recline. The squab recline catches are located near the joint.

The rear cushions come with a pressed steel base with antislip profile that forms an effective antisubmarining structure in conjunction with the beam welded to the rear floor pan. On the sliding version, the slide mechanisms are secured to the body floorpan and controlled by Bowden cables with handles fixed in the central part of the seat. Central grab handle for full seat slide manoeuvre, right grab handle for reclining or adjusting the squab on the same side, left grab handle for reclining or adjusting the squab on the same side. To recline the squab from the luggage compartment, use the squab catch release knob near the wheel arch.

Parts & tools for this job Staging For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.