LONGDITUDINAL MOULDING ON ROOF R R

Operation 7055A15 · EXTERIOR MOULDINGS

1.3 JTD 16v · SUV

Removing

1. Release the front panel and remove it.

1. Undo the retaining nuts.

Use a blade to cut the adhesive.

2. Remove the moulding.

Refitting

Thoroughly clean the area of the roof where the moulding will be bonded and remove any previous residues (where fastened to the same door).

1. Position the moulding in its seat and secure with adhesive.

If the moulding removed previously is re-used, clean off any adhesive traces and apply a new adhesive with the same properties.

2. Tighten the retaining nuts.

1. Fit the front panel in position.