Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Fiat Multipla Factory Service Manual (1998-2010)22 · Fault diagnosis
22 · Diagnostics

Starter motor not working

Make
Fiat
Model
Multipla Factory Service Manual
Year
1998–2010
Section
Starting › Starter motor not working
Fault diagnosisStarter motor not working

STARTER MOTOR NOT WORKING

When the key is turned to the On position the instruments light up, but the starter motor does not turn

Results of the tests
0PRELIMINARY CHECKSAll OKProblems metOperation
Place the key in the ON position and check that the recharging warning light comes on (it should then go out when the engine is started up).Continue to Step 1The recharging warning light does not come onSee table K40
1CHECK STARTER MOTOR CONNECTIONSAll OKProblems metOperation
Check the connections between the battery, alternator and starter motor ( See E5010 STARTING AND RECHARING).Continue to Step 2Connections not correctRestore the connections
2CHECK STARTER MOTORAll OKProblems metOperation
Check condition and correct operation of starter motor.Continue to Step 3Starter motor faulty.Overhaul or replace the starter motor. Op. 5520B14
3CHECKING CORRECT OPERATIONAll OKProblems metOperation
Check that the fault is no longer presentEnd of diagnosisFault persistsSearch for the fault starting from another symptom'

Parts & tools for this job Staging For 1998 Fiat Multipla

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.