Timing system protective cover(s) - r + r

Operation 1032D12 · Timing system protections

1.6 16v

Removing

- 4450B10 Front WHEEL (one) - R.R.

1. Unscrew the cover retaining bolts

2. Remove the protective cover.

Refitting

Position the protective cover.

Tighten the protective cover retaining bolts to the specified torque.

- 4450B10 Front WHEEL (one) - R.R.

1.9 JTD 8V

Removing

- 4450B10 Front WHEEL (one) - R.R.

- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.

- 1092G10 single engine belt r r

- 1092A12 crankshaft pulley - r+r for versions with air conditioner

- 1016A10 sound-proofing cover - r + r

- 1008C10 power unit upper reaction link r r

- 1008C14 engine link bracket - r r

Cut the cam angle sensor retaining collars.

1. Unscrew the retaining bolts.

2. Remove the timing belt upper guard.

1. Undo bolt (1a) and remove fixed auxiliary drivebelt tensioner (1b).

2. Undo bolts (2a) and remove lower timing belt guard (2b).

Refitting

Fit the lower timing belt guard.

Fit the auxiliary drivebelt fixed drive pulley and tighten the bolt to torque.

Fit the upper timing belt guard.

Use new collars to secure the cam angle sensor lead to the upper timing belt guard.

- 1008C14 engine link bracket - r r

- 1008C10 power unit upper reaction link r r

- 1016A10 sound-proofing cover - r + r

- 1092A12 crankshaft pulley - r+r for versions with air conditioner

- 1092G10 single engine belt r r

- 7055B64 Engine compartment DUST shield in front wheel arch (one), left or right - R.R.

- 4450B10 Front WHEEL (one) - R.R.