Rear rigid mount - r r

Operation 1008A44 · Power unit fastenings

1.6 16v

Removing

Place the car on a ramp.

Position a column jack beneath the engine to support it safely.

1. Undo the bolts fixing the rigid mount to the reinforcement.

2. Unscrew and withdraw retaining bolt (2a). Unscrew retaining nuts (2b).

3. Remove the rigid mount from the engine.

Refitting

Position the rigid mount and tighten the nuts retaining it to the gearbox to torque.

Insert the bolt into the hole on the mount and tighten to torque.

Tighten the bolts securing the reinforcement bracket to the rigid engine mount.

Tighten the bolts securing the reinforcement bracket to the crankcase.

Remove the column jack.

Remove the vehicle from the ramp.

1.9 JTD 8V

Removing

- 1076B50 exhaust pipe attachment to engine - r + r

1. Undo the retaining bolts and nut.

2. Remove the rigid exhaust pipe mount.

1. Position a hydraulic jack under the engine.

2. Undo the rigid mount retaining bolts.

3. Remove the rigid mount.

Refitting

Fit the rigid mount and secure by tightening the bolts to the specified torque.

Remove the hydraulic jack.

Fit the rigid exhaust pipe mount.

Tighten the retaining bolts and nut.

- 1076B50 exhaust pipe attachment to engine - r + r