Battery - r+r
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Current generator › Battery - r+r
Electrical equipmentBattery - r+r
Battery - r+r
Removing
1. With the ignition key in the OFF position, disconnect the negative battery terminal (1a) and the positive battery terminal (1b).
| Name | Connector | |
|---|---|---|
| 1a | Battery | A1A |
| Name | Connector | |
|---|---|---|
| 1b | Battery | A1B |
2. Undo the nut (2a) fixing the retaining bracket (2b).
3. Release the battery from the retaining bracket and remove it.
Refitting
Check the condition and the efficiency of the battery.
Position the battery on the drip tray.
Position the retaining bracket and tighten the fixing nut.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | BATTERY SUPPORT BRACKET | M6 | 1.4 |
Connect the negative and positive battery poles.
Tighten the nuts fixing the poles to the battery to the recommended torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Nut | BATTERY POLES | M6 | 0.4 |
Close the bonnet lid.
Check the operation of the electrical system.
Parts & tools for this job Staging For 1998 Fiat Multipla
- TOOLBattery testerSearch: car battery tester
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBattery terminal cleanerSearch: battery terminal cleaner
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.