Cooling system - tightness test
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Various controls › Cooling system - tightness test
Cooling system - tightness test
Unscrew and remove the cap from the coolant expansion tank.
1. Screw onto the tank filler the kit for various models (or alternatively connection 1.895.362.007 connected to pump 1.895.377.002).
| Name | Country | |
|---|---|---|
| 1 | Kit for various models | 1.895.377.000 |
Manually pressurize the system and check that the pressure gauge reading remains constant at the specified value.
| Measurement | Value | ||
|---|---|---|---|
| System test pressure (bar) | 1.08 |
Remove the tool from the expansion tank.
1. Screw the specific connector onto the coolant tank cap.
| Name | Country | |
|---|---|---|
| 1 | Connector | 1.895.362.007 |
2. Connect onto the connector the kit for various models (or alternatively pump 1.895.377.002).
| Name | Country | |
|---|---|---|
| 2 | Kit for various models | 1.895.377.000 |
Manually pressurize the cap and check on the pressure gauge that the pressure relief valve on the cap opens at the specified pressure.
| Measurement | Value | ||
|---|---|---|---|
| Opening pressure (bar) | da 0.99 a 1.01 |
Unscrew the cap from the tool and screw it onto the coolant tank.
Parts & tools for this job Staging For 1998 Fiat Multipla
- FLUIDCoolantSearch: Fiat coolant antifreeze
- PARTThermostatSearch: Fiat Multipla 1998 thermostat
- TOOLCooling system pressure testerSearch: cooling system pressure tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.