Vacuum pump - r+r
- Make
- Fiat
- Model
- Multipla Factory Service Manual
- Year
- 1998–2010
- Section
- Hydraulic braking system › Vacuum pump - r+r
‹ Prev Vacuum pipe for brake servo - r+rNext › FLEXIBLE PIPE (one), left or right, to front brake calipers - R.R .
BrakesVacuum pump - r+r
Vacuum pump - r+r
Removing
1. Disconnect the vacuum pipe from the vacuum unit.
2. Undo the fixing bolts (2a) and remove the vacuum unit (2b) complete with O-ring.
Recover the vacuum unit gasket from the housing with the camshaft cap.
Refitting
Replace the gasket and the O-ring before refitting.
Fit the vacuum unit.
Tighten the fixing bolts to torque.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| Bolt | FLYWHEEL SIDE COVER | M8 | 2.1 - 2.6 |
Connect the vacuum intake pipe to the vacuum unit.
‹ Prev Vacuum pipe for brake servo - r+rNext › FLEXIBLE PIPE (one), left or right, to front brake calipers - R.R .
Parts & tools for this job Staging For 1998 Fiat Multipla
- PARTBrake padsSearch: Fiat Multipla 1998 brake pads
- TOOLBrake bleeder kitSearch: one man brake bleeder kit
- FLUIDBrake fluidSearch: brake fluid
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.