Front brake pads - replace with wheels removed

Operation 3310A62 · FRONT DISC BRAKES

Removing

1. Release the rubber retainer (1a) for the brake pipe from the housing (1b) on the suspension damper.

2. Disconnect the electrical connection for the brake pad wear cable.

3. Remove the spring fixing the brake caliper to the bracket.

4. Remove the rear bolt covers (4a), undo the bolts (4b) underneath, then remove the front brake caliper (4c).

5. Remove the brake pads from the caliper and replace them.

Refitting

Fit the new brake pads in the caliper.

Fit the front brake caliper on the disc.

Fix the brake caliper tightening the two rear fixing bolts to the recommended torque.

Fit the caliper fixing spring in the correct position.

Connect the brake pad wear electrical connection.

Secure the pipe to the suspension damper.