CONNECT - FUNCTIONAL DESCRIPTION

Functional description

The integrated radio-telephone-navigator

P20

is supplied directly (7 of connector A) from the battery via the line of the fuse F39 of the unit under the dashboard

B2

and maxifuse CPL of

B99

The supply to the side lights on reaches pin 4 of connector A

See E2530 INSTRUMENT LIGHTING

Pins 1 and 3 of connector A receive the CAN line with which the radio

P20

is connected to the Body Computer

M1

and the other nodes of the system.

Pin 8 of connector A is earthed.

The aerial

P25

is supplied from pin 5 of connector A. The aerial containing the GPS reception device is connected to the navigator module by means of the specific coaxial cable.

Connector B sends out cables carrying signals to the speakers through which the voice messages are sent:

The ''MODE'' buttons of the

H10

controls unit are supplied by the line (INT) protected by the fuse F39 of control unit

B2

, and send the command to the instrument panel

E50

, pin 16 of connector B.

The instrument panel

E50

is in turn connected via the CAN network to the Body Computer

M1

and the integrated radio-telephone-navigator

P20