Seat belt does not lock
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Seats › Seat belt does not lock
SEAT BELT DOES NOT LOCK
The seat belt does not lock even when the belt emerges with a jerk
| Results of the tests | ||||
| 1 | CHECK LOCKING DEVICE | All OK | Problems met | Operation |
|---|---|---|---|---|
Pull the belt out sharply to check whether the inertia reel locks. Check the reel is correctly fitted | Continue to Step 2 | One front belt does not lock | Replace the front belt Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R | |
| One side rear belt does not lock | Replace the side rear belt Op. | |||
| The centre rear belt does not lock | Replace the centre rear belt Op. | |||
| Incorrect fitting | Continue according to the instructions in See table | |||
| 2 | ROAD TEST | All OK | Problems met | Operation |
| Carry out a road test. Ensure the belt blocks when the car is braked suddenly | Continue to Step 3 | The front belt does not lock | Replace the front belt Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R | |
| The side rear belt does not lock | Replace the side rear belt Op. | |||
| The centre rear belt does not lock | Replace the centre rear belt Op. | |||
| 3 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | |||
Parts & tools for this job Staging For 2003 Alfa Romeo GT
- TOOLOBD2 scanner with SRSSearch: OBD2 scanner ABS SRS
- TOOLTrim removal tool kitSearch: trim removal tool kit
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.