Belt rewinding failure
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Seats › Belt rewinding failure
BELT REWINDING FAILURE
The seat belt does not rewind correctly and/or completely after the buckle is undone
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
| Visually inspect that the belt does not have kinks, loose threads and/or damage which could prevent it from rewinding | Continue to Step 1 | There are kinks in the front belt | Remove the kinks, if necessary replace the belt Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R | |
| There are kinks in the side rear belt | Remove the kinks, if necessary replace the belt Op. | |||
| There are kinks in the centre rear belt | Remove the kinks, if necessary replace the belt Op. | |||
| Front belt damaged | Replace the front belt Op. Op. 7065A12 FRONT SEAT BELT (ONE), LH OR RH, WITH PRETENSIONER ON WHEEL - R R | |||
| Side rear belt damaged | Replace the side rear belt Op. | |||
| Centre rear belt damaged | Replace the centre rear belt Op. | |||
| 1 | CORRECT FITTING CHECK | All OK | Problems met | Operation |
| Check that the system is correctly fitted | Continue to Step 2 | Incorrect fitting. | Continue according to the instructions in See table | |
| 2 | CHECK ON CORRECT OPERATION | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | |||
Parts & tools for this job Staging For 2003 Alfa Romeo GT
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Alfa Romeo GT
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.