Rpm and timing sensor - r r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Diesel injection system › Rpm and timing sensor - r r
EngineRpm and timing sensor - r r
RPM AND TIMING SENSOR - R R
Removing
Position the vehicle on the ramp
Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | See A1B BATTERY ( BATTERY NEGATIVE ) |
Proceed with removal
Op. 7055B54 UNDER-ENGINE GUARD - R R
1. Disconnect the electrical connection for the rpm sensor.
2. Undo the bolt (2a) and remove the engine rpm sensor (2b).
| Name | Connector | |
|---|---|---|
| 1 | Rpm sensor | See K46 RPM SENSOR ( CONNECTORS ) |
Refitting
Place the engine rpm sensor back in its housing and fix it using the bolt.
Connect the electrical connection for the rpm sensor.
Proceed with refitting
Op. 7055B54 UNDER-ENGINE GUARD - R R.
Connect the negative (-) battery terminal
Remove the car from the ramps.
Parts & tools for this job Staging For 2003 Alfa Romeo GT
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.