Clutch pedal switch - r r
- Make
- Alfa Romeo
- Model
- GT Factory Service Manual
- Year
- 2003–2010
- Section
- Diesel injection system › Clutch pedal switch - r r
CLUTCH PEDAL SWITCH - R R
Removing
Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).
| Name | Connector | |
|---|---|---|
| Battery | See A1B BATTERY ( BATTERY NEGATIVE ) |
1. Disconnect the electrical connection from the switch on the clutch pedal.
| Name | Connector | |
|---|---|---|
| 1 | Clutch pedal switch | See I31 CLUTCH PEDAL SWITCH ( FRONT ) |
2. Turn the switch clockwise through 90 degrees and remove.
Refitting
Press the clutch pedal, then refit the clutch pedal switch and turn through 90 degrees anticlockwise until it clicks home on the detent ridge.
Press the clutch pedal through its full travel to allow the switch to settle.
Release the clutch pedal and pull back to the end of its travel (rest position).
If the switch is not fully back, it could hold the clutch pedal forward and prevent the hydraulic clutch circuit filling properly.
Connect the electrical connection to the switch on the clutch pedal.
Connect the negative (-) battery terminal
Parts & tools for this job Staging For 2003 Alfa Romeo GT
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.