IGNITION SWITCH CONTACTS CARRIER BLOCK - R+R

Operation 5520A18 · IGNITION SWITCH

2.0 JTS, 3.2 V6, 1.9 JTD 16V

Removing

1. If necessary, adjust the steering wheel height adjustment lever.

2. Undo the bolts securing the lower trim.

3. Remove the lower trim by disengaging from the lower retainers and steering wheel

1. Disconnect the electrical connections (1a, 1b) from the ignition switch.

2. Release the retainers (2a) and remove the contact holder connector (2b) from its housing.

Refitting

Check that the contact holder connector is not damaged.

Position the contact holder connector and attach it to the retainers.

Connect the electrical connections.

Refit the lower half casing and secure it using the bolts.

Check the operation of the ignition switch.