Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo GT Factory Service Manual (2003-2010)12 · Brakes
12 · Brakes

Front brake pads - replace with wheels removed

Make
Alfa Romeo
Model
GT Factory Service Manual
Year
2003–2010
Section
Disc brakes › Front brake pads - replace with wheels removed
BrakesFront brake pads - replace with wheels removed

FRONT BRAKE PADS - REPLACE WITH WHEELS REMOVED

Operation 3310A62 · FRONT DISC BRAKES

3.2 V6

Removing

Ensure that the ignition key is in the OFF position, then disconnect the negative battery terminal (-).

NameConnector
BatterySee A1B BATTERY ( BATTERY NEGATIVE )

1. Disconnect the electrical connections for the brake pad wear cable.

NameConnector
1Left brake pad wear sensor switchSee K20 LEFT BRAKE PAD WEAR SENSOR SWITCH ( FRONT )

2. Remove the pins (2a) and remove the stop (2b).

FRONT BRAKE PADS - REPLACE WITH WHEELS REMOVED

1. Remove the front brake pads.

FRONT BRAKE PADS - REPLACE WITH WHEELS REMOVED

Refitting

Compress front brake caliper pistons.

Refit the front brake pads.

Refit the stop in its seating and secure it with the pins.

Connect the electrical connection for the brake pad wear cable.

Connect the negative (-) battery terminal

Parts & tools for this job Staging For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.