PUMP/CENTRAL OBS PIPE - R R

Operation 3340B52 · ABS SYSTEM PIPES

Removing

Position the vehicle on the ramp

Proceed with removal

Op. 4450B02 LEFT FRONT WHEEL R R

Remove the protective cap on the brake caliper bleed valve.

Connect the collection system (pipe and reservoir) to the bleed valve on the brake caliper.

Loosen the bleed valve on the brake caliper

Operate the brake pedal until the brake-clutch fluid reservoir is empty.

3.2 V6

Refitting

1. Place the rigid pipe from the master cylinder to the ABS hydraulic unit (1a) back in its seating, tighten the connectors (1b) and (1c) to the recommended torque and secure it with the attachment (1d).

All versions

Proceed with refitting

Op. 0010T64 BRAKE AND OR CLUTCH FLUID CHECK LEVEL AND TOP UP AS NECESSARY.

Proceed with refitting

Op. 0010T65 HYDRAULIC BRAKE SYSTEM BLEED AIR.

Proceed with refitting

Op. 4450B02 LEFT FRONT WHEEL R R.

Remove the car from the ramps.

1.8 T.SPARK, 2.0 JTS, 1.9 JTD 16V

1. Undo the connectors (1a) and (1b) and remove the rigid pipe from the master cylinder to the ABS hydraulic unit (1c) after releasing it from the attachment (1d).

3.2 V6

1. Undo the connectors (1a) and (1b) and remove the rigid pipe from the master cylinder to the ABS hydraulic unit (1c) after releasing it from the attachment (1d).

1.8 T.SPARK, 2.0 JTS, 1.9 JTD 16V

1. Place the rigid pipe from the master cylinder to the ABS hydraulic unit (1a) back in its seating, tighten the connectors (1b) and (1c) to the recommended torque and secure it with the attachment (1d).