Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Alfa Romeo GT Factory Service Manual (2003-2010)11 · Axles and driveshafts
11 · General

Intermediate drive shaft - r r

Make
Alfa Romeo
Model
GT Factory Service Manual
Year
2003–2010
Section
Front axle › Intermediate drive shaft - r r
Axles and driveshaftsIntermediate drive shaft - r r

INTERMEDIATE DRIVE SHAFT - R R

Operation 2710A31 · DRIVE SHAFTS AND JOINTS

2.0 JTS

Removing

Position the vehicle on a lift.

Proceed with the removal

Op. 4450B04 RIGHT FRONT WHEEL R R.

Proceed with the removal

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..

Proceed with the removal

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..

Proceed with the removal

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with the removal

Op. 4410A80 DAMPER LOWER FORK - R R

(right side).

1. Undo the bolts fixing the right driveshaft to the intermediate driveshaft.

INTERMEDIATE DRIVE SHAFT - R R

Proceed with the removal

Op. 2710A30 INTERMEDIATE DRIVE SHAFT - R + R WITH R/H DRIVE SHAFT REMOVED.

Refitting

Proceed with the refitting

Op. 2710A30 INTERMEDIATE DRIVE SHAFT - R + R WITH R/H DRIVE SHAFT REMOVED.

1. Tighten the bolts fixing the right driveshaft to the intermediate driveshaft to the recommended torque.

FasteningComponentØ

Value

(daNm)

1BoltDRIVESHAFTM8(Differential internal driveshaft side) 3.6 - 4.4
INTERMEDIATE DRIVE SHAFT - R R

Proceed with the refitting

Op. 4410A80 DAMPER LOWER FORK - R R

(right side).

Proceed with the refitting

Op. 0010T41 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY.

Proceed with the refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with the refitting

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..

Proceed with the refitting

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..

Proceed with the refitting

Op. 4450B04 RIGHT FRONT WHEEL R R.

Remove the vehicle from the lift.

3.2 V6

Removing

Position the vehicle on a lift.

Proceed with the removal

Op. 4450B04 RIGHT FRONT WHEEL R R.

Proceed with the removal

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..

Proceed with the removal

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..

Proceed with the removal

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with the removal

Op. 4410A80 DAMPER LOWER FORK - R R.

1. Undo the bolts fixing the right driveshaft to the intermediate driveshaft.

INTERMEDIATE DRIVE SHAFT - R R

Proceed with the removal

Op. 2710A30 INTERMEDIATE DRIVE SHAFT - R + R WITH R/H DRIVE SHAFT REMOVED.

Refitting

Proceed with the refitting

Op. 2710A30 INTERMEDIATE DRIVE SHAFT - R + R WITH R/H DRIVE SHAFT REMOVED.

1. Tighten the bolts fixing the right driveshaft to the intermediate driveshaft to the recommended torque.

FasteningComponentØ

Value

(daNm)

1BoltDRIVESHAFTM10(Intermediate driveshaft side) 5.8 - 7.0
INTERMEDIATE DRIVE SHAFT - R R

Proceed with the refitting

Op. 4410A80 DAMPER LOWER FORK - R R.

Proceed with the refitting

Op. 0010T41 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY.

Proceed with the refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with the refitting

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..

Proceed with the refitting

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..

Proceed with the refitting

Op. 4450B04 RIGHT FRONT WHEEL R R.

Remove the vehicle from the lift.

1.9 JTD 16V

Removing

Position the vehicle on a lift.

Proceed with the removal

Op. 4450B04 RIGHT FRONT WHEEL R R.

Proceed with the removal

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..

Proceed with the removal

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..

Proceed with the removal

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with the removal

Op. 4410A80 DAMPER LOWER FORK - R R

(right side).

1. Loosen the band and disconnect the right driveshaft from the intermediate driveshaft.

INTERMEDIATE DRIVE SHAFT - R R

Proceed with the removal

Op. 2710A30 INTERMEDIATE DRIVE SHAFT - R + R WITH R/H DRIVE SHAFT REMOVED.

Refitting

Proceed with the refitting

Op. 2710A30 INTERMEDIATE DRIVE SHAFT - R + R WITH R/H DRIVE SHAFT REMOVED.

Connect the right driveshaft to the intermediate driveshaft and tighten the band.

Proceed with the refitting

Op. 4410A80 DAMPER LOWER FORK - R R

(right side).

Proceed with the refitting

Op. 0010T41 MANUAL GEARBOX OIL CHECK LEVEL AND TOP UP IF NECESSARY.

Proceed with the refitting

Op. 7055B54 UNDER-ENGINE GUARD - R R.

Proceed with the refitting

Op. 7055B91 RIGHT FRONT WHEEL ARCH LINER - R.R..

Proceed with the refitting

Op. 7055B66 ENGINE COMPARTMENT DUST SHIELD PROTECTION IN RIGHT FRONT WHEEL ARCH - R.R..

Proceed with the refitting

Op. 4450B04 RIGHT FRONT WHEEL R R.

Remove the vehicle from the lift.

1.8 T.SPARK

Removing

  • Undo the bolts fixing the right driveshaft to the intermediate driveshaft.
INTERMEDIATE DRIVE SHAFT - R R

Refitting

  • Tighten the bolts fixing the right driveshaft to the intermediate driveshaft to the recommended torque.
FasteningComponentØ

Value

(daNm)

1BoltDRIVESHAFTM8(Intermediate driveshaft side) 3.5 - 4.3 daNm
INTERMEDIATE DRIVE SHAFT - R R

Parts & tools for this job Staging For 2003 Alfa Romeo GT

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.