Standard equipment/available on request
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Wheels and tyres › Standard equipment/available on request
STANDARD EQUIPMENT/AVAILABLE ON REQUEST
| 2.2 JTS | 3.2 JTS | 2.4 JTD 20v | ||
|---|---|---|---|---|
| Fitted as standard | rim | 7J x 16 alloy | 7.5J x 17” alloy | 7.5J x 17” alloy |
| tyre | 215/55 R16 93V | 225/50 R17 98W | 225/50 R17 98W | |
| Available on request | rim | 7.5J x 17” alloy | ||
| tyre | 225/50 R17 98W | |||
| rim | 8J x 18” alloy | 8J x 18” alloy | 8J x 18” alloy | |
| tyre | 235/45 R18 98W | 235/45 R18 98W | 235/45 R18 98W | |
| Spare wheel (for versions/markets where specified) | rim | 4.00B x 17” | ||
| tyre | T125/80 R17 | |||
Without prejudice to the recommended dimensions, it is vital for safety reasons that the vehicle is fitted with tyres of the same make and type on all wheels.
Only spider type snow chains can be fitted on 225/50 F17" type tyres.
Snow chains cannot be fitted on 235/45 R18" type tyres because of interference with the wing
On 3.2 JTS versions the snow chains must be fitted on the front axis of the vehicle.
The use of chains may be compulsory for vehicles with four wheel drive.
The wheels (rims and tyres) installed at the factory are the most suitable for the specifications of the vehicle and guarantee maximum safety and comfort in all normal driving conditions.
Before replacing rims or tyres fitted on the vehicle, consult the table for the permitted types.
Ensure that the rim-tyre combination fitted matches the original specification.
Always fit new replacement tyres and not any of dubious origin.
Do not use air chambers with tubeless tyres.
Parts & tools for this job Staging For 2005 Alfa Romeo Brera
- TOOLTyre pressure gaugeSearch: digital tyre pressure gauge
- TOOLTorque wrenchSearch: 1/2 inch torque wrench
- TOOLBreaker barSearch: breaker bar
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.