Workshop Manuals Factory service & repair

Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)23 · Fault diagnosis

23 · Diagnostics

Poor driving comfort - at front

Make: Alfa Romeo
Model: Brera and Spider Factory Service Manual
Year: 2005–2010
Section: Steering – vehicle behaviour › Poor driving comfort - at front

‹ Prev Drift whilst braking Next › Poor driving comfort - at rear

Fault diagnosisPoor driving comfort - at front

POOR DRIVING COMFORT - AT FRONT

The customer complains of poor driving comfort especially noticeable at the front.

1	ROAD TEST TO EVALUATE THE DRIVING COMFORT	All OK	Problems encountered	Operation
	Carry out a road test to evaluate the driving comfort of the front suspension See Test 44A ROAD TEST FOR COMFORT EVALUATION	End of diagnosis	Subjective judgement compared with the reference vehicle 6	Acceptable behaviour of the vehicle
			Subjective judgement compared with the reference vehicle 5.5	Move on to Step 2
			Subjective judgement compared with the reference vehicle 3-4	Move on to Step 4
2	END OF TRAVEL BUFFER CHECK	All OK	Problems encountered	Operation
	Raise the vehicle on a two column lift and check that the end of travel buffer is correctly inserted in its housing carrying out the See Test 4410AB CHECKING RUBBER BLOCK AND BEARING ON FRONT SHOCK ABSORBER	Move on to Step 3	End of travel buffer not correctly inserted	Refit the buffer correctly
3	UPPER AND LOWER TRACK CONTROL ARM BUSHES CHECK	All OK	Problems encountered	Operation
	Check the condition of the upper and lower track control arm bushes The guard under the engine must be removed in order to check the condition of the lower track control arms Op. 7055B54 UNDER ENGINE PROTECTION/GUARD - R.R.	Move on to Step 4	Upper track control arm bushes deteriorated	Replace the upper track control arm Op. 4410B68 LOWER SWINGING ARM(ONE), LH OR RH OF FRONT SUSPENSION - R R -CHECK WHEEL ALIGNMENT SEPARATELY
		Move on to Step 4	Lower track control arm bushes deteriorated	Replace the lower track control arm Op. 4410B52 FRONT SUSPENSION LOWER TRACK CONTROL ARM REAR BUSH LEFT OR RIGHT - REPLACE AT BENCH
4	SHOCK ABSORBER EFFICIENCY CHECK	All OK	Problems encountered	Operation
	Check the efficiency of the shock absorbers by carrying out manual compression manoeuvres (resting on the bonnet by the centre of the wheel), which should be carried out on both sides of the vehicle.	Move on to Step 5	Sudden return without damping	Replace the shock absorber that is not working properly Op. 4410A12 FRONT SUSPENSION DAMPER (ONE), LH OR RH - FOR MCPHERSON STRUT SYSTEM - INCLUDES DISMANTLING/REASSEMBLY OF ASSEMBLY AT BENCH - R.R
5	VEHICLE GEOMETRY CHECK	All OK	Problems encountered	Operation
	After replacing the shock absorbers, check the geometry	End of diagnosis	Geometry values do not conform	Restore the geometry to the correct values Op. 4450A10 FRONT WHEEL GEOMETRY - CHECK USING OPTICAL EQUIPMENT - INCLUDES ADJUSTMENT IF NECESSARY

‹ Prev Drift whilst braking Next › Poor driving comfort - at rear

Parts & tools for this job Staging For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.