Workshop Manuals Factory service & repair Alfa Romeo
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)23 · Fault diagnosis
23 · Diagnostics

Rear seat backrest adjustment stiff

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Seats › Rear seat backrest adjustment stiff
Fault diagnosisRear seat backrest adjustment stiff

REAR SEAT BACKREST ADJUSTMENT STIFF

Hardening/creaking of backrest when folding over

Test results
1CHECK ON LOWER FASTENINGS MOVEMENTAll OKProblems encounteredOperation
Check that the lower backrest fastenings on the vehicle move freely (rapid attachment to wheel arch)Move on to Step 2Interference with foreign objects or with fastening elementsRemove the causes of the interference
2CHECK ON MATCHING BETWEEN BACKREST AND VEHICLE INTERIOR TRIMAll OKProblems encounteredOperation
Check the matching of the backrest with the vehicle interior trim (wheel arch liners, door panels, etc.) folding the backrest overMove on to Step 3Interference with trimsReposition the trims and/or carry out the correct backrest fitting cycle
3CENTRE BRACKET CONDITION CHECKAll OKProblems encounteredOperation
Check the condition of the centre bracket (for the split seat). Also check there is no knockingMove on to Step 4No plastic bush on the rotation pinRemove the backrest and fit the plastic noise prevention bush
4CHECK ON CORRECT FASTENING OF CENTRE BRACKETAll OKProblems encounteredOperation
Check that the fastening of the centre bracket with the backrest structure and with the floor is correctMove on to Step 5Incorrect fastening of bracket with backrest and/or with floorRetighten the centre bracket to the backrest and/or the floor to the correct torque
5CHECK ON CORRECT OPERATIONAll OKProblems encounteredOperation
Check that the fault is no longer presentEnd of diagnosisThe fault persists

Replace the left backrest

Op. 7050A13 SPLIT REAR SEAT LEFT BACKREST - R.R.

Replace the right backrest

Op. 7050A15 SPLIT REAR SEAT RIGHT BACKREST - R.R.

Parts & tools for this job Staging For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.