Boot opening/closing not working
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Doors › Boot opening/closing not working
BOOT OPENING/CLOSING NOT WORKING
When the opening/closing of the luggage compartment is operated using the key, or the opening using the button in the control panel, the boot does not open and does not close
| 1 | FUSE AND RELAY CHECK | All OK | Problems encountered | Operation |
|---|---|---|---|---|
Check the condition of the fuses and relays | Move on to Step 2 | Components faulty | Replace the component (in the case of a fuse, find out what caused it to blow) | |
| 2 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
| Check the boot lid opening/closure in active diagnosis | Move on to Step 6 | The boot will not open/close | Move on to Step 3 | |
| 3 | ELECTRICAL CIRCUIT CHECK | All OK | Problems encountered | Operation |
Check the electrical connection between the body computer node, driver''s door node and boot lock | Move on to Step 4 | Electrical connector on boot lock incorrectly connected | Connect the electrical connector to the boot lock correctly | |
| Connections broken or not insulated | Restore the continuity/insulation of the electrical connection | |||
| 4 | ELECTRICAL SIGNAL CHECK | All OK | Problems encountered | Operation |
| Disconnect the electrical connector for the boot lid lock and check for the opening control signal | Move on to Step 5 | Opening control signal missing | Move on to Step 7 | |
| 5 | CHECK ON CORRECT OPERATION | All OK | Problems encountered | Operation |
| Check that the fault is no longer present. | End of diagnosis. | The fault persists. | Replace the boot lock motor Op. 7015B70 TAILGATE LOCK MOTOR - R.R AND CHECK LOCK SUPPLY LINE | |
| 6 | CHECK USING DIAGNOSTIC EQUIPMENT | All OK | Problems encountered | Operation |
| Press the button in the dashboard and check the driver''s door node to ensure that the status of the boot lid opening button alters while in parameter mode. | Move on to Step 8 | There is no change in status | Move on to Step 7 | |
| 7 | ELECTRICAL CIRCUIT CHECK | All OK | Problems encountered | Operation |
Check the electrical connection between the switch on the console and the driver''s door node See E3045 BOOT AND FUEL FLAP OPENING Check that the switch is working properly | Move on to Step 8 | Connections broken or not insulated | Restore the continuity/insulation of the electrical connection | |
| Switch faulty | Replace the switch on the console | |||
| 8 | REPLACE THE DRIVER''S DOOR NODE | All OK | Problems encountered | Operation |
Replace the Driver''s Door Node Op. 5505A42 CONTROL UNIT (DIGITAL NETWORK NODE) IN DRIVER'S DOOR - R.R. and check that the fault is no longer present. | End of diagnosis. | The fault persists. | Restore the driver''s door node and replace the body computer |
Parts & tools for this job Staging For 2005 Alfa Romeo Brera
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Alfa Romeo touch up paint
- PARTPanel clip assortmentSearch: Alfa Romeo panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.