Coolant pipe from cylinder head r r
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Engine cooling › Coolant pipe from cylinder head r r
‹ Prev Water pump rigid coolant inlet pipe - r.r.Next › Coolant supply pipe from crankcase to oil/water heat exchanger - r.r. with rear engine support removed
EngineCoolant pipe from cylinder head r r
COOLANT PIPE FROM CYLINDER HEAD R R
Removing
1. Loosen the bands (1a) and (1b), open some of the fastening clips and remove the degasing pipe (1c).
Refitting
- Position the degasing pipe in its seat, secure it with the clips and connect it to the cylinder head and the engine coolant reservoir using the bands.
‹ Prev Water pump rigid coolant inlet pipe - r.r.Next › Coolant supply pipe from crankcase to oil/water heat exchanger - r.r. with rear engine support removed
Parts & tools for this job Staging For 2005 Alfa Romeo Brera
- PARTEngine gasket setSearch: Alfa Romeo Brera 2005 engine gasket set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLFeeler gauge setSearch: feeler gauge set
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.