Reversing light switch - r+r
- Make
- Alfa Romeo
- Model
- Brera and Spider Factory Service Manual
- Year
- 2005–2010
- Section
- Warning and manoeuvring indicators › Reversing light switch - r+r
REVERSING LIGHT SWITCH - R+R
Removing
- Position the vehicle on a lift.
- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).
| Description | Connector | |
|---|---|---|
| Battery | See A001 BATTERY |
1. Disconnect the electrical connection from the reversing light switch.
| Description | Connector | |
|---|---|---|
| 1 | Reversing lights switch | See I020 REVERSING LIGHTS SWITCH |
2. Undo and remove the reversing light switch.
Refitting
- Place the reversing light switch in position and tighten it to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Reversing light switch | M | (gearbox side) 1.7 |
- Connect the electrical connection to the reversing light switch.
- Connect the negative battery terminal.
- Remove the vehicle from the lift.
Removing
Op. 1016A10 SOUND-PROOFING COVER - R.R
1. Disconnect the electrical connection for the reversing light switch.
| Description | Connector | |
|---|---|---|
| 1 | Reversing lights switch | See I020 REVERSING LIGHTS SWITCH |
2. Undo and remove the reversing light switch.
Refitting
- Place the reversing light switch in position and tighten it to the recommended torque.
| Component | Fastening | dia | Value (daNm) | Validity |
|---|---|---|---|---|
| Reversing light switch | M | (Gearbox side) 1.7 |
- Connect the electrical connection for the reversing light switch.
Parts & tools for this job Staging For 2005 Alfa Romeo Brera
- TOOLOBD2 scannerSearch: OBD2 scanner
- TOOLDigital multimeterSearch: automotive digital multimeter
- TOOLBack-probe test leadsSearch: back probe test leads
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.