Workshop Manuals Factory service & repair Alfa Romeo
Alfa Romeo Brera and Spider Factory Service Manual (2005-2010)17 · Electrical equipment
17 · Electrical

Engine RPM sensor - r+r

Make
Alfa Romeo
Model
Brera and Spider Factory Service Manual
Year
2005–2010
Section
Engine ignition › Engine RPM sensor - r+r
Electrical equipmentEngine RPM sensor - r+r

ENGINE RPM SENSOR - R+R

Operation 5510C26 · COIL, ECU, SENSORS

2.2 JTS

Removing

- Make sure that the ignition key is in the OFF position, then disconnect the battery terminal (-).

DescriptionConnector
BatterySee A001 BATTERY

- Disconnect the electrical connection for the rpm sensor.

DescriptionConnector
Rpm sensorSee K046 RPM SENSOR

- Undo the bolt and remove the rpm sensor.

Refitting

- Position the rpm sensor in its housing and secure it using the bolt.

- Connect the electrical connection for the rpm sensor.

- Connect the negative battery terminal.

3.2 JTS

This operation can only be carried out with the power unit removed, therefore refer to:

Op. 1004B10 POWER UNIT WITH MANUAL GEARBOX - R.R

Op. 1004D10 POWER UNIT (MANUAL GEARBOX), REMOVED, DISMANTLE AND REASSEMBLE

Op. 1004D40 ENGINE - POSITION ON STAND AND REMOVE

Op. 1004E10 ENGINE, REMOVED - REMOVE CYLINDER HEAD AND OIL SUMP FOR INSPECTION - INCLUDES POSITIONING ON STAND AND REMOVAL

Op. 1004E20 ENGINE - DISMANTLE AND REASSEMBLE FOLLOWING OPERATION 1004E10 - WASH AND CHECK DISMANTLED PARTS - REFIT CYLINDER HEAD AND OIL SUMP - DOES NOT INCLUDE REPAIRS TO CYLINDER HEAD AND AUXILIARY UNIT

Parts & tools for this job Staging For 2005 Alfa Romeo Brera

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.