Workshop Manuals Factory service & repair

Alfa Romeo 147 Factory Service Manual (2000-2002)18 · Fault diagnosis

18 · Diagnostics

K01 Rev counter not working

Make: Alfa Romeo
Model: 147 Factory Service Manual
Year: 2000–2002
Section: Instruments › K01 Rev counter not working

‹ Prev J33 Automatic demisting not working Next › K03 Speedmeter not working

Fault diagnosisK01 Rev counter not working

K01 Rev counter not working

With the engine started, the rev counter does not work, or it works irregularly.

Step	Test procedure	Result	Action
1	CHECK WITH DIAGNOSTIC EQUIPMENT Connect the Examiner equipment to the diagnostic socket. Verify: that there are no faults in the instrument panel	OK	Move onto step 2
1		There are errors	Proceed in accordance with the instructions given by the diagnostic equipment End of diagnosis
2	CHECK WITH DIAGNOSTIC EQUIPMENT Connect the Examiner equipment to the diagnostic socket. Check, by active diagnosis, that the pointer is working.	OK	Move onto step 3
2		Rev counter is not working	Replace instrument panel Op. 5560B11 End of diagnosis
3	CHECK ELECTRICAL CIRCUIT Check connections between instrument panel Body Computer and I.E. control unit	OK	Move onto step 4
3		Faulty wiring	Restore/replace the wiring: Wiring diagram E4010 INSTRUMENT PANEL End of diagnosis
4	CHECK ON CORRECT OPERATION Check that the fault is no longer present	OK	Incorrect selection of diagnostic procedure
4		Fault persists	Incorrect selection of diagnostic procedure

‹ Prev J33 Automatic demisting not working Next › K03 Speedmeter not working

Parts & tools for this job Staging For 2000 Alfa Romeo 147

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.