Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Lancia Ypsilon Factory Service Manual (2003-2011)19 · Wiring diagrams and electrical functions
19 · Electrical

FOG LIGHTS - Description

Make
Lancia
Model
Ypsilon Factory Service Manual
Year
2003–2011
Section
Interior lighting › FOG LIGHTS - Description
Wiring diagrams and electrical functionsFOG LIGHTS - Description

FOG LIGHTS - Description

Description

The vehicle has two additional fog lights in the front bumper.

The fog lights are activated through a button in the control panel in the centre of the dashboard; when the lights are on the warning light in the instrument panel comes on.

A special relay, in the engine compartment control unit, controls the switching on of the fog lights via a line protected by a special fuse.

The relay is managed by the Body Computer: the relay is energized in the following conditions:

  • go ahead signal with key in ON position (INT);
  • signal coming from the switch
  • side lights on signal.

In addition, if the side lights are switched off, the fog lights are also switched off even if the button is pressed. When the side lights are switched on again, the fog lights come on again.

If the ignition key is switched OFF and then turned back to the ON position, the operating button must be pressed once again in order to turn the fog lights back on.

Parts & tools for this job Staging For 2003 Lancia Ypsilon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.