Workshop Manuals Factory service & repair Lancia
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Axles and driveshafts12 Brakes13 Steering14 Suspension and wheels15 Heating, air conditioning and auxiliary units16 Electrical equipment17 Body fittings18 Body panels and frame19 Wiring diagrams and electrical functions20 Wiring harnesses21 Connectors and pin-outs22 Fault diagnosis23 Special tools
Lancia Ypsilon Factory Service Manual (2003-2011)06 · Maintenance
06 · Maintenance

Change manual gearbox oil

Make
Lancia
Model
Ypsilon Factory Service Manual
Year
2003–2011
Section
New units and planned maintenance. › Change manual gearbox oil
MaintenanceChange manual gearbox oil

Change manual gearbox oil

Operation 0010T40 · Vehicle oil and fluids

1.2 8v, 1.2 16v, 1.4 16v

Place the car on a lift.

1. Undo the gearbox casing filler plug.

Change manual gearbox oil

1.3 JTD

Place the car on a lift.

Proceed with removal.

1. Undo the gearbox casing filler plug.

Change manual gearbox oil

1.2 8v, 1.2 16v, 1.4 16v

1. Undo the gearbox casing drain plug and collect the oil in a suitable container.

Collect the gearbox oil in a suitable container.

Do not disperse the oil into the environment, as indiscriminate dispersal of this product causes pollution.

Change manual gearbox oil

1.3 JTD

1. Undo the gearbox casing drain plug and collect the oil in a suitable container.

Collect the gearbox oil in a suitable container.

Do not disperse the oil into the environment, as indiscriminate dispersal of this product causes pollution.

Change manual gearbox oil

1.2 8v, 1.2 16v, 1.4 16v

Clean the drain plug, refit and tighten to the recommended torque.

FasteningComponentØ

Value

(daNm)

Drain plugGEAR CASING PADSM16(Differential side) 1.6 ÷ 2.0

Refill the gearbox with the specified oil through the filler hole.

TypeComponentNameQty.
Oli [l]MANUAL GEARBOXTUTELA CAR ZC 75 SYNTH

Check that the oil level reaches the bottom of the filler hole.

Clean the drain plug, refit and tighten to the recommended torque.

FasteningComponentØ

Value

(daNm)

Filler plugGEAR CASING PADSM22(Differential side) 2.3 ÷ 2.8

Remove the car from the ramps.

1.3 JTD

Clean the drain plug, refit and tighten to the recommended torque.

FasteningComponentØ

Value

(daNm)

Drain plugGEAR CASING PADSM22(Differential side) 4.6

Refill the gearbox with the specified oil through the filler hole.

TypeComponentNameQty.
Oli [l]MANUAL GEARBOXTUTELA CAR ZC 75 Synth1.98

Check that the oil level reaches the bottom of the filler hole.

Clean the drain plug, refit and tighten to the recommended torque.

FasteningComponentØ

Value

(daNm)

Filler plugGEAR CASING PADSM22(Differential side) 2.0 ÷ 3.0

Proceed with refitting.

Remove the car from the ramps.

Parts & tools for this job Staging For 2003 Lancia Ypsilon

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.