Gear control lever - r r

Operation 2125C28 · Manual gearbox external control (cables)

1.2 8v, 1.2 16v, 1.4 16v

Removing

Proceed with removal - 7040L28 tunnel switch panel - r r.

Proceed with removal - 7040L22 REAR TRIM on TUNNEL -R.R..

Proceed with removal - 7040L20 tunnel trim - r r.

Proceed with removal - 7040A18 glove compartment on facia - arrange.

Proceed with removal - 7040A30 Left instrument panel lower TRIM - R.R..

Proceed with removal - 2125A30 lever/knob cover - r + r.

Proceed with removal - 7040A28 TRIM on gearbox control panel - R.R..

1. Disconnect the gear selector and engagement cables for the manual gearbox.

2. Remove the gear control lever (2a) and the housing (2b) from the support.

1.3 JTD

Removing

Proceed with removal - 7040L28 tunnel switch panel - r r.

Proceed with removal - 7040L22 REAR TRIM on TUNNEL -R.R..

Proceed with removal - 7040L20 tunnel trim - r r.

Proceed with removal - 7040A18 glove compartment on facia - arrange.

Proceed with removal - 7040A30 Left instrument panel lower TRIM - R.R..

Proceed with removal - 2125A30 lever/knob cover - r + r.

Proceed with removal - 7040A28 TRIM on gearbox control panel - R.R..

1. Disconnect the gear selector and engagement cables for the manual gearbox.

2. Remove the gear control lever (2a) and the housing (2b) from the support.

1.2 8v, 1.2 16v, 1.4 16v

Refitting

Place the manual gearbox control lever and the housing in the housing on the support.

1.3 JTD

Refitting

Place the manual gearbox control lever and the housing in the housing on the support.

1.2 8v, 1.2 16v, 1.4 16v

Connect the gear selector and engagement cables to the manual gearbox control lever.

Adjust the gear selector cable (OP2125C30).

1.3 JTD

Connect the gear selector and engagement cables to the manual gearbox control lever.

Proceed with refitting - 7040A28 TRIM on gearbox control panel - R.R..

Proceed with refitting - 2125A30 lever/knob cover - r + r.

Proceed with refitting - 7040A30 Left instrument panel lower TRIM - R.R..

Proceed with refitting - 7040A18 glove compartment on facia - arrange.

Proceed with refitting - 7040L20 tunnel trim - r r.

Proceed with refitting - 7040L22 REAR TRIM on TUNNEL -R.R..

Proceed with refitting - 7040L28 tunnel switch panel - r r.

1.2 8v, 1.2 16v, 1.4 16v

Proceed with refitting - 7040A28 TRIM on gearbox control panel - R.R..

Proceed with refitting - 2125A30 lever/knob cover - r + r.

Proceed with refitting - 7040A30 Left instrument panel lower TRIM - R.R..

Proceed with refitting - 7040A18 glove compartment on facia - arrange.

Proceed with refitting - 7040L20 tunnel trim - r r.

Proceed with refitting - 7040L22 REAR TRIM on TUNNEL -R.R..

Proceed with refitting - 7040L28 tunnel switch panel - r r.