Accelerator control cable - r + r

Operation 1068A30 · Accelerator pedal control

1.2 8v

Removing

Proceed with removal - 1048A10 air cleaner filtering element - replace.

1. Disconnect the accelerator cable (1a) from the throttle valve control (1b).

2. Remove the clip (2a) and release accelerator cable from bracket (2b).

1. Disconnect the accelerator cable from the pedal.

Remove the accelerator cable, disconnecting it from the rubber cable duct on the bulkhead and from the mounting bracket.

Refitting

Refit the accelerator cable by passing through the bulkhead rubber fitting and fitting to the bracket.

Connect the accelerator cable to the pedal.

Fix the accelerator cable to the mounting bracket using the clip.

Connect the accelerator cable to the throttle valve.

Proceed with refitting - 1068A10 accelerator pedal control - check, adjust if necessary and lubricate.

Proceed with refitting - 1048A10 air cleaner filtering element - replace.