09 · Transmission

Clutch - r + r with gearbox removed

Make: Lancia
Model: Ypsilon Factory Service Manual
Year: 2003–2011
Section: Clutch mechanisms › Clutch - r + r with gearbox removed

‹ Prev Clutch - r + r Next › Thrust bearing linkage - r + r

ClutchClutch - r + r with gearbox removed

Clutch - r + r with gearbox removed

Operation 1810A24 · Clutch mechanism

1.2 8v, 1.2 16v, 1.4 16v

Removing

1. Fit the flywheel lock.

	Name	Country
1	Counter-torque	1.860.846.000

2. Undo the bolts (2a) and remove the clutch cover (2b).

Remove the clutch disc.

1.3 JTD

Removing

1. Fit the flywheel lock.

	Name	Country
1	Counter-torque	1.860.846.000

2. Undo the bolts (2a) and remove the clutch cover (2b).

The bolts are pre-treated with sealant and so new ones should be fitted whenever they are replaced.

3. Remove the clutch disc.

1.2 8v, 1.2 16v, 1.4 16v

Refitting

1. Place the clutch disc and the clutch drip tray (1a) back in its housing using the centering tool (1b).

	Name	Country
1b	Clutch centering	1.875.086.000

2. Tighten the bolts fixing the clutch cover to the recommended torque.

	Fastening	Component	Ø	Value (daNm)
2	Bolt	CLUTCH ASSEMBLY	M8	(Engine flywheel side) 2.5 ÷ 3.1

Fastening

Component

Value

(daNm)

Bolt

CLUTCH ASSEMBLY

(Engine flywheel side) 2.5 ÷ 3.1

Remove the clutch disc and clutch cage centring tool.

	Name	Country
	Clutch centering	1.875.086.000

Remove the flywheel lock.

	Name	Country
	Counter-torque	1.860.846.000