R.R. FRONT BUMPER

Operation 7210E10 · External parts

Removing

Place the vehicle on a lift.

Open the bonnet lid.

1. Working on both sides of the car, undo the bolts (1a) securing the end of the front wheelarch (1b).

1. Move the wheel arch (1a) slightly and undo the bolts (1b) fixing the side of the bumpers.

2. Disconnect the electrical connections for the fog lights.

Raise the car.

1. Undo the lower bolts fixing the bumper.

Lower the vehicle.

1. Undo the upper bolts fixing the bumper.

2. Remove the bumper.

If necessary, see op. 7205E10

Refitting

Check that the bumper is undamaged.

1. Position bumpers (1a) and engage pins (1b) and slots (1c) in their seats on both sides.

2. Tighten the side bolts.

Tighten the upper bolts fixing the bumper.

Raise the vehicle and tighten the lower bolts fixing the bumper.

Connect the electrical connections of the front fog lamps.

Tighten the front wheel arch bolts

Reclose the bonnet lid.

Remove the vehicle from the lift.

If necessary, - 5540D38 fog lamp beam - adjust