Tailgate - adjust striker and adapt seal if necessary
- Make
- Lancia
- Model
- Ypsilon Factory Service Manual
- Year
- 2003–2011
- Section
- Tailgate/ › Tailgate - adjust striker and adapt seal if necessary
‹ Prev Tailgate interior panel - r+rNext › Tailgate - adjust centring and profile - includes hinge and compartment seal adaptation
Body fittingsTailgate - adjust striker and adapt seal if necessary
Tailgate - adjust striker and adapt seal if necessary
Open the tailgate.
1. Check along the whole perimeter that the tailgate seal is inserted fully in its seating.
2. If necessary, adjust the buffer blocks.
3. If necessary, remove the covers (3a) and undo the screws (3b) then adjust the position of the lock striker (3c), making use of the slotted holes. Permitted adjustment movements are indicated by arrows.
4. Tighten the fixing bolts.
| Fastening | Component | Ø | Value (daNm) | |
|---|---|---|---|---|
| 4 | Bolt | TAIL-GATE LOCK STRIKER | M6 | 0.9 |
Check that the striker and catch fit together properly and are aligned when the tailgate is closed.
‹ Prev Tailgate interior panel - r+rNext › Tailgate - adjust centring and profile - includes hinge and compartment seal adaptation
Parts & tools for this job Staging For 2003 Lancia Ypsilon
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Lancia touch up paint
- PARTPanel clip assortmentSearch: Lancia panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.