Workshop Manuals Factory service & repair Fiat
01 General information02 Specifications03 Manufacturing data and tolerances04 Tightening torques05 Fluids and lubricants06 Maintenance07 Diagnostic checks08 Engine09 Clutch10 Gearbox and differential11 Transmission (4x4)12 Axles and driveshafts13 Brakes14 Steering15 Suspension and wheels16 Heating, air conditioning and auxiliary units17 Electrical equipment18 Body fittings19 Body panels and frame20 Wiring diagrams and electrical functions21 Wiring harnesses22 Connectors and pin-outs23 Fault diagnosis24 Special tools
Fiat Panda Factory Service Manual (2003-2012)20 · Wiring diagrams and electrical functions
20 · Electrical

COURTESY LIGHTS - Description

Make
Fiat
Model
Panda Factory Service Manual
Year
2003–2012
Section
Interior lighting › COURTESY LIGHTS - Description
Wiring diagrams and electrical functionsCOURTESY LIGHTS - Description

COURTESY LIGHTS - Description

Description

The front ceiling light is the rocker type and contains a courtesy light.

The courtesy light is switched on/off according to the following logic:

  • to switch the courtesy light on permanently, press the light on the right hand side;
  • to switch the courtesy light off, press the light on the left hand side;
  • to switch the courtesy light on automatically, keep it in the centre position.

The courtesy light is switched on automatically in the following circumstances:

  • when the driver's door is opened;
  • when the inertia switch is operated, for a maximum of 15 minutes.

The courtesy light is switched off automatically in the following circumstances:

  • when the driver's door is closed;
  • when the inertia switch is reactivated.

The rear courtesy light comes on or goes off when the tailgate is opened or closed, respectively.

Door lock

Description

The front ceiling light is the rocker type and contains a courtesy light.

The courtesy light is switched on/off according to the following logic:

  • to switch the courtesy light on permanently, press the light on the right hand side;
  • to switch the courtesy light off, press the light on the left hand side;
  • for automatic management by the body computer node, keep the courtesy light in the centre position.

The body computer node switches the courtesy light on automatically in the following circumstances:

  • when any of the doors (front or rear) is opened, for a maximum time of 3 minutes which is reactivated each time a door is opened;
  • when the ignition key is removed, for a maximum time of 10 seconds;
  • when the doors are unlocked (using the remote control or the driver/passenger door catch), for a maximum time of 15 minutes;
  • by turning the ignition key to the OFF position, for a maximum time of 10 seconds;
  • when the intertia switch is operated, for a maximum time of 15 minutes.

The body computer node switches off the courtesy light automatically in the following circumstances:

  • when the ignition key is turned to the POS position;
  • when the doors are locked (using the remote control or the driver's/passenger door catch)
  • when the inertia switch is reactivated.

The rear courtesy light switches on or off when the tailgate is opened or closed, respectively.

Parts & tools for this job Staging For 2003 Fiat Panda

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.