Side lights not working
- Make
- Fiat
- Model
- Panda Factory Service Manual
- Year
- 2003–2012
- Section
- Lights › Side lights not working
SIDE LIGHTS NOT WORKING
The side lights are switched on directly by the Body Computer Node at the same time as the number plate lights.
| Results of the tests | ||||
| 0 | PRELIMINARY CHECKS | All OK | Problems met | Operation |
|---|---|---|---|---|
With the ignition ON, turn the ring nut on the steering column switch unit to the side lights and check that the side lights and the number plate lights come on. Turn the key to the OFF position and check that they remain on | End of diagnosis | None of the lights come on in any conditions | Coolant leaks detected See table I01 | |
| None of the lights come on in any conditions | Coolant leaks detected See table I02 | |||
| None of the lights come on in any conditions | Continue to Step 1 | |||
| 1 | CHECKING WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Connect the Examiner to the diagnostic equipment and check that there are no faults at the Body Computer Node | Continue to Step 2 | the operation of the lights in active diagnosis. | Continue according to the instructions for the diagnostic equipment | |
| 2 | ELECTRICAL EQUIPMENT CHECK | All OK | Problems met | Operation |
Check the condition of the bulbs. Check the continuity and insulation of the wiring for the front and rear side lights | Continue to Step 3 | Check the continuity and insulation of the wiring for the front and rear side lights | Change bulbs Op. 5540B26 | |
| Rear bulbs burnt out | Change bulbs Op. 5540A42 | |||
| Connections broken/short circuited | Renew the electrical connections See E2010 SIDE LIGHTS / NO. PLATE LIGHTS | |||
| 3 | CHECK WITH DIAGNOSTIC EQUIPMENT | All OK | Problems met | Operation |
| Keeping the Examiner diagnostic equipment connected, check the operation of the side lights through active diagnosis | Continue to Step 4 | None of the side lights come on | Replace the Body Computer Op. 5540A42 | |
| 4 | Continue as instructed by the tester | All OK | Problems met | Operation |
| Check that the fault is no longer present | End of diagnosis | |||
Parts & tools for this job Staging For 2003 Fiat Panda
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Fiat Panda
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.